micromedia 7 capacitive - VTFT settings
micromedia 7 capacitive - VTFT settings
If I want to create a new project for Mikromedia 7 CAPACITIVE (stm32f767), which hardware pattern should I choose for VTFT?
- jovana.medakovic
- mikroElektronika team
- Posts: 986
- Joined: 18 Dec 2018 10:36
Re: micromedia 7 capacitive - VTFT settings
Hello,
In the attachment, you can find XML file which you have to put it in the folder where your compiler is installed on the path:
\Mikroelektronika\mikroC PRO for ARM\Board Defs
After that, you can choose ___Mikromedia_7_for_STM32F767ZG pattern.
Kind regards,
Jovana
In the attachment, you can find XML file which you have to put it in the folder where your compiler is installed on the path:
\Mikroelektronika\mikroC PRO for ARM\Board Defs
After that, you can choose ___Mikromedia_7_for_STM32F767ZG pattern.
Kind regards,
Jovana
- Attachments
-
- ___Mikromedia_7_for_STM32F767ZG.zip
- (2.22 KiB) Downloaded 150 times
Re: micromedia 7 capacitive - VTFT settings
Thank You for the quick reply,
best regards
Marek
best regards
Marek
- jovana.medakovic
- mikroElektronika team
- Posts: 986
- Joined: 18 Dec 2018 10:36
Re: micromedia 7 capacitive - VTFT settings
Hi,
You're welcome.
Kind regards,
Jovana
You're welcome.
Kind regards,
Jovana
Re: micromedia 7 capacitive - VTFT settings
In the manual I read:
We have equipped our compilers with dozens of examples that demonstrate the use of each and every feature of the mikromedia 7 CAPACITIVE development board. This makes an excellent starting point for future custom projects. Just load the example, read well commented code, and see how it works on hardware.
Where can I download the examples?
Thanks, best regards
We have equipped our compilers with dozens of examples that demonstrate the use of each and every feature of the mikromedia 7 CAPACITIVE development board. This makes an excellent starting point for future custom projects. Just load the example, read well commented code, and see how it works on hardware.
Where can I download the examples?
Thanks, best regards
Re: micromedia 7 capacitive - VTFT settings
Hi
I used ___Mikromedia_7_for_STM32F767ZG.zip, thank.
I did a very easy project:
1) Screen1 with botton1
On_click Event
void Button1OnClick() {
DrawScreen(&Screen2);
}
2) Screen2 with botton2
On_click Event
void Button2OnClick() {
DrawScreen(&Screen1);
}
The code does not work.
I had to change
char FT5XX6_Config() {
FT5XX6_SetI2CAddress(0x38);
if (FT5XX6_IsOperational() != FT5XX6_OK)
return FT5XX6_FAILURE;
FT5XX6_SetDefaultMode();
FT5XX6_SetController(_TC_FT5X26);
FT5XX6_SetSizeAndRotation(800,480,0);
return FT5XX6_OK;
}
to
char FT5XX6_Config() {
FT5XX6_SetI2CAddress(0x38);
if (FT5XX6_IsOperational() != FT5XX6_OK)
return FT5XX6_FAILURE;
FT5XX6_SetDefaultMode();
FT5XX6_SetController(_TC_FT5X26);
FT5XX6_SetSizeAndRotation(800,480,1); <----------------
return FT5XX6_OK;
}
It works sometime, but sometime it does not work.
Can someone help me, please?
Where can I download example files?
Thanks a lot, best regards.
Marco
I used ___Mikromedia_7_for_STM32F767ZG.zip, thank.
I did a very easy project:
1) Screen1 with botton1
On_click Event
void Button1OnClick() {
DrawScreen(&Screen2);
}
2) Screen2 with botton2
On_click Event
void Button2OnClick() {
DrawScreen(&Screen1);
}
The code does not work.
I had to change
char FT5XX6_Config() {
FT5XX6_SetI2CAddress(0x38);
if (FT5XX6_IsOperational() != FT5XX6_OK)
return FT5XX6_FAILURE;
FT5XX6_SetDefaultMode();
FT5XX6_SetController(_TC_FT5X26);
FT5XX6_SetSizeAndRotation(800,480,0);
return FT5XX6_OK;
}
to
char FT5XX6_Config() {
FT5XX6_SetI2CAddress(0x38);
if (FT5XX6_IsOperational() != FT5XX6_OK)
return FT5XX6_FAILURE;
FT5XX6_SetDefaultMode();
FT5XX6_SetController(_TC_FT5X26);
FT5XX6_SetSizeAndRotation(800,480,1); <----------------
return FT5XX6_OK;
}
It works sometime, but sometime it does not work.
Can someone help me, please?
Where can I download example files?
Thanks a lot, best regards.
Marco
- stefan.filipovic
- mikroElektronika team
- Posts: 1135
- Joined: 18 Dec 2018 10:30
Re: micromedia 7 capacitive - VTFT settings
Hi Marco,
I noticed that you have opened a Support Ticket regarding this matter.
I believe I've answered you there.
Kind regards,
I noticed that you have opened a Support Ticket regarding this matter.
I believe I've answered you there.
Kind regards,
Stefan Filipović
Re: micromedia 7 capacitive - VTFT settings
Hi,
thank a lot. It's a very very simple code example,the proble was option: it has to be 2, not 1 or 0.
Where can I download other examples that the "use of each and every feature of the mikromedia 7 CAPACITIVE development board"?
Thank, best regards
M.
thank a lot. It's a very very simple code example,the proble was option: it has to be 2, not 1 or 0.
Where can I download other examples that the "use of each and every feature of the mikromedia 7 CAPACITIVE development board"?
Thank, best regards
M.
- stefan.filipovic
- mikroElektronika team
- Posts: 1135
- Joined: 18 Dec 2018 10:30
Re: micromedia 7 capacitive - VTFT settings
Hi Marco,
You have already asked the same question on your Helpdesk ticket, so we can continue this correspondence there.
Kind regards,
You have already asked the same question on your Helpdesk ticket, so we can continue this correspondence there.
Kind regards,
Stefan Filipović
Re: micromedia 7 capacitive - VTFT settings
How to use mikrobus on mikromedia 7 capacitive?
Thank, best regards.
Thank, best regards.
- stefan.filipovic
- mikroElektronika team
- Posts: 1135
- Joined: 18 Dec 2018 10:30
Re: micromedia 7 capacitive - VTFT settings
Hi,
I believe that the mikroBUS shield for mikromedia 7 CAPACITIVE could be released in the near future, so you will be able to use it with click boards.
Kind regards,
I believe that the mikroBUS shield for mikromedia 7 CAPACITIVE could be released in the near future, so you will be able to use it with click boards.
Kind regards,
Stefan Filipović
Re: micromedia 7 capacitive - VTFT settings
Where are the examples for Micromedia 7 and the Basic for 32 compiler?
- Tanja_Kovacevic
- mikroElektronika team
- Posts: 98
- Joined: 09 Aug 2021 11:39
Re: micromedia 7 capacitive - VTFT settings
Hi ronjodu,
Unfortunately, we only have the example written in C:
https://libstock.mikroe.com/projects/vi ... capacitive
Kind regards,
Tanja
Unfortunately, we only have the example written in C:
https://libstock.mikroe.com/projects/vi ... capacitive
Kind regards,
Tanja
Re: micromedia 7 capacitive - VTFT settings
Thanks, I will try to get by with those.
Is there an XML file to add to the basic32 compiler for the micromedia 7 capacitive?
Is there an XML file to add to the basic32 compiler for the micromedia 7 capacitive?
- Tanja_Kovacevic
- mikroElektronika team
- Posts: 98
- Joined: 09 Aug 2021 11:39
Re: micromedia 7 capacitive - VTFT settings
Hi,
The XML files are the same in every compiler.
You can use the one that my colleague Jovana had attached if you use the same MCU: STM32F767ZG
Just place it on the right location for your Basic compiler: \...\Mikroelektronika\mikroBasic PRO for ARM\Board Defs
If this is not the case, my advice is to copy an existing one and adapt it for your MCU.
Kind regards,
Tanja
The XML files are the same in every compiler.
You can use the one that my colleague Jovana had attached if you use the same MCU: STM32F767ZG
Just place it on the right location for your Basic compiler: \...\Mikroelektronika\mikroBasic PRO for ARM\Board Defs
If this is not the case, my advice is to copy an existing one and adapt it for your MCU.
Kind regards,
Tanja