Help needed for 3x3 keypad matrix
-
- Posts: 1
- Joined: 04 Sep 2019 11:10
Help needed for 3x3 keypad matrix
Hi all, I just need some help. I have succesfully implemented a 4x4 keypad using the included library of mikroC PRO for AVR, but I have to add a 3x3 keypad in the same project. I'm using a ATCAN128 so I have ports to do it, but it seems that I cannot use the same library to add a second keypad to the project. Can anybody help? Thanks in advance.
- stefan.filipovic
- mikroElektronika team
- Posts: 1135
- Joined: 18 Dec 2018 10:30
Re: Help needed for 3x3 keypad matrix
Hi,
Welcome to the MikroE forum.
Unfortunately, you cannot use two keypads on two different PORTs with our Keypad 4x4 library.
There are some keypad libraries uploaded by our customers on the LibStock, so you can try using some of them for your second keypad.
You may try with this one.
Kind regards,
Welcome to the MikroE forum.
Unfortunately, you cannot use two keypads on two different PORTs with our Keypad 4x4 library.
There are some keypad libraries uploaded by our customers on the LibStock, so you can try using some of them for your second keypad.
You may try with this one.
Kind regards,
Stefan Filipović
Re: Help needed for 3x3 keypad matrix
Do the two keypads need to be usable simultaneously?
If not then they could share columns effectively giving a 4*7 (or 7*4) keypad. Then again if the standard library is limited to 4*4 then that's not so much help.
If not then they could share columns effectively giving a 4*7 (or 7*4) keypad. Then again if the standard library is limited to 4*4 then that's not so much help.