Visual TFT Cyrillic
Visual TFT Cyrillic
How to get a Russian font Mikromedija PIC18?
Re: Visual TFT Cyrillic
Hi,
I believe the same question was raised on our Support Desk.
Regards,
Filip.
I believe the same question was raised on our Support Desk.
Regards,
Filip.
Re: Visual TFT Cyrillic
When you see the Cyrillic ?
Devices purchased and lying idle !
Projects are !
Devices purchased and lying idle !
Projects are !
Re: Visual TFT Cyrillic
Hi,
I apologize for this issue, as soon as we fix this I will contact you.
In the meantime, you can make custom Cyrillic fonts using GLCD Font Creator and implement it in the code :
http://www.mikroe.com/glcd-font-creator/
Regards,
Filip.
I apologize for this issue, as soon as we fix this I will contact you.
In the meantime, you can make custom Cyrillic fonts using GLCD Font Creator and implement it in the code :
http://www.mikroe.com/glcd-font-creator/
Regards,
Filip.
Re: Visual TFT Cyrillic
It took a long time, and Cyrillic not displayed !
When fix this error?
I bought a lot of equipment and I can not get to work because there is no Russian language Mikromedija PIC18
Take back everything you have purchased the device and programs that do not understand the Russian font !
This device purchased more than $ 1,000
I'd better buy for this money from another manufacturer !
When fix this error?
I bought a lot of equipment and I can not get to work because there is no Russian language Mikromedija PIC18
Take back everything you have purchased the device and programs that do not understand the Russian font !
This device purchased more than $ 1,000
I'd better buy for this money from another manufacturer !
Re: Visual TFT Cyrillic
Hi,
I am very sorry for the trouble with the Cyrillic alphabet, this is in our plans.
For now, you can use escape sequences, like this \xF5\xD3\xD4\xD2\xCF\xCA\xD3\xD4\xD7\xCF, to write Cyrillic characters
where the hexadecimal number represents the character position in the used font.
Regards,
Filip.
I am very sorry for the trouble with the Cyrillic alphabet, this is in our plans.
For now, you can use escape sequences, like this \xF5\xD3\xD4\xD2\xCF\xCA\xD3\xD4\xD7\xCF, to write Cyrillic characters
where the hexadecimal number represents the character position in the used font.
Regards,
Filip.
Re: Visual TFT Cyrillic
http://www.libstock.com/projects/view/4 ... for-atmega
maybe this can help.
maybe this can help.
Serge T.
Learning is an endeless process but it must start somewhere!
Learning is an endeless process but it must start somewhere!
Re: Visual TFT Cyrillic
I want to write my letters , and not to engage in an empty case !filip wrote:Hi,
For now, you can use escape sequences, like this \xF5\xD3\xD4\xD2\xCF\xCA\xD3\xD4\xD7\xCF, to write Cyrillic characters
where the hexadecimal number represents the character position in the used font.
Regards,
Filip.
It took so long , but Cyrillic or not !
Re: Visual TFT Cyrillic
Toley wrote:http://www.libstock.com/projects/view/4 ... for-atmega
maybe this can help.
I bought to work, instead of looking like I get to see the Cyrillic .
Then let the producers and wrote that they would not work Cyrillic .
I would not spend the money and buy a useless piece of iron !
Re: Visual TFT Cyrillic
Чё кричишь то? Я тоже был в шоке от такой фигни, но щас смирился и приспособился ...
По другому тут не получится т.к. у них стандарт не расширенного стандарта - ANSI
т.е. только до 128-го символа кодировки, т.е. только латиница с цифрами.
Для таких как мы вот только указанный способ:
Выбери шрифт Lucida Console KOI8, конечный символ укажи 254 (End Char 254)
далее смотри таблицу кодировки KOI8-R http://ru.wikipedia.org/wiki/%D0%9A%D0%9E%D0%98-8
В строке Caption пиши так: \xDF (это одна буква, слово просто подряд \xDF\xDF\xDF )
где DF - это код кириллической буквы "Ъ", а "\x" - служебный разделитель
Это только мы с тобой понимаем, что это на самом деле кидалово, а для них это нормальный бизнес-продукт ...
Самое смешное, что в Сербии по идее тоже кириллица, но походу как их посетили америкосы, так они забыли свой язык ...
По другому тут не получится т.к. у них стандарт не расширенного стандарта - ANSI
т.е. только до 128-го символа кодировки, т.е. только латиница с цифрами.
Для таких как мы вот только указанный способ:
Выбери шрифт Lucida Console KOI8, конечный символ укажи 254 (End Char 254)
далее смотри таблицу кодировки KOI8-R http://ru.wikipedia.org/wiki/%D0%9A%D0%9E%D0%98-8
В строке Caption пиши так: \xDF (это одна буква, слово просто подряд \xDF\xDF\xDF )
где DF - это код кириллической буквы "Ъ", а "\x" - служебный разделитель
Это только мы с тобой понимаем, что это на самом деле кидалово, а для них это нормальный бизнес-продукт ...
Самое смешное, что в Сербии по идее тоже кириллица, но походу как их посетили америкосы, так они забыли свой язык ...
HW: µM Plus for STM32, µM for ATMEGA, µM for XMEGA, MINI-AT, µProgSTM32, ConnectEVE.
SW: mikroC AVR, ARM, VisualTFT.
Clicks: WiFi+, GSM, GSM2, Bluetooth, ADC, DAC, RTC, IrThermo,
FM, OSD, GPS-L10, GYRO, Altitude, Compass, nRF C, USB adapter, SpeakUp.
SW: mikroC AVR, ARM, VisualTFT.
Clicks: WiFi+, GSM, GSM2, Bluetooth, ADC, DAC, RTC, IrThermo,
FM, OSD, GPS-L10, GYRO, Altitude, Compass, nRF C, USB adapter, SpeakUp.
Re: Visual TFT Cyrillic
Да их нада заебать,тогда исправят!!RomanT wrote:
Это только мы с тобой понимаем, что это на самом деле кидалово, а для них это нормальный бизнес-продукт ...
Самое смешное, что в Сербии по идее тоже кириллица, но походу как их посетили америкосы, так они забыли свой язык ...
Вдули фуфло честному гражданину и теперь отписками занимаются.. Пусть исправляют свои косяки..че я должен там подстраиваться под ихние примочки,а потом сделают кирилицу и опять все по новой...
Вывали ть весь их софт в халяву без всяких регилог и фуфловых номеркоф и будет им бизнес тру ля ля..
Re: Visual TFT Cyrillic
ой тут блин такая задница, они толи нарочно тупят, толи в натуре тупые.
спрашиваешь об одном - несут совсем другое или тупа промолчат ...
такое ощущение что в сапорте одни блондинки - не хрена не понимают о чем базар ...
чтоб что то объяснить - нужно объяснять короткими четкими выражениями, чтоб не могли содержать синонимов и антонимов, как для 3-х летнего ребёнка.
Т.е. как америкосовская клавиатура - без альтернативной символики, тупа одна латиница.
Кстате, у них тут только один боле-мене вменяемый чел - Филип, остальные просто клоуны ...
спрашиваешь об одном - несут совсем другое или тупа промолчат ...
такое ощущение что в сапорте одни блондинки - не хрена не понимают о чем базар ...
чтоб что то объяснить - нужно объяснять короткими четкими выражениями, чтоб не могли содержать синонимов и антонимов, как для 3-х летнего ребёнка.
Они не считают это косяком - они тупа не поддерживают расширенной кодировки.Пусть исправляют свои косяки..че я должен там подстраиваться под ихние примочки,а потом сделают кирилицу и опять все по новой...
Т.е. как америкосовская клавиатура - без альтернативной символики, тупа одна латиница.
Кстате, у них тут только один боле-мене вменяемый чел - Филип, остальные просто клоуны ...
HW: µM Plus for STM32, µM for ATMEGA, µM for XMEGA, MINI-AT, µProgSTM32, ConnectEVE.
SW: mikroC AVR, ARM, VisualTFT.
Clicks: WiFi+, GSM, GSM2, Bluetooth, ADC, DAC, RTC, IrThermo,
FM, OSD, GPS-L10, GYRO, Altitude, Compass, nRF C, USB adapter, SpeakUp.
SW: mikroC AVR, ARM, VisualTFT.
Clicks: WiFi+, GSM, GSM2, Bluetooth, ADC, DAC, RTC, IrThermo,
FM, OSD, GPS-L10, GYRO, Altitude, Compass, nRF C, USB adapter, SpeakUp.
Re: Visual TFT Cyrillic
Hi all,
I have ever faced this issue with GLCD. I just wonder that why ME don't extend font array genereted from VGLCD, VTFT and glcd font creator software to support universal language.
It would be useful for other user that came from different place to make their language to show on glcd or tft easily.
I have tried to display Thai's font on GLCD and i have explain some imformation how to workaround for this issue. in under link
http://www.mikroe.com/forum/viewtopic.php?f=88&t=51811
Maybe this will be able to give you some idea.
Best Regards.
I have ever faced this issue with GLCD. I just wonder that why ME don't extend font array genereted from VGLCD, VTFT and glcd font creator software to support universal language.
It would be useful for other user that came from different place to make their language to show on glcd or tft easily.
I have tried to display Thai's font on GLCD and i have explain some imformation how to workaround for this issue. in under link
http://www.mikroe.com/forum/viewtopic.php?f=88&t=51811
Maybe this will be able to give you some idea.
Best Regards.
- janko.kaljevic
- Posts: 3565
- Joined: 16 Jun 2011 13:48
Re: Visual TFT Cyrillic
Hello,
At the moment VTFT tool and compiler do not support unicode, so only way to implement other language scripts is to use specific fonts.
Something similar already used prakob and RomanT.
This way user can implement other languages and scripts with first 255 characters of desired font.
Bellow is a print screen of the two labels in Cyrillic font as reference.
User only needs to have appropriate font installed on the system and VisualTFT will generate font table and desired label will be visible on hardware.
In this example I used Cyrillic Russian font.
I hope this was helpful.
At the moment VTFT tool and compiler do not support unicode, so only way to implement other language scripts is to use specific fonts.
Something similar already used prakob and RomanT.
This way user can implement other languages and scripts with first 255 characters of desired font.
Bellow is a print screen of the two labels in Cyrillic font as reference.
User only needs to have appropriate font installed on the system and VisualTFT will generate font table and desired label will be visible on hardware.
In this example I used Cyrillic Russian font.
I hope this was helpful.
- Attachments
-
- font-test.JPG (46.4 KiB) Viewed 10990 times
Re: Visual TFT Cyrillic
Да программа сама пишет кирилицу!!!
Только когда скомпилишь ее,то на экране ЖКИ получаются мудазяки!!!
You show it to me on the LCD screen !
Только когда скомпилишь ее,то на экране ЖКИ получаются мудазяки!!!
You show it to me on the LCD screen !