Mistake in V7.0.0
Mistake in V7.0.0
Hello
What do you mean with this funktion ? See attachmend.
This close not the program it close the mikroprog suit program.
What do you mean with this funktion ? See attachmend.
This close not the program it close the mikroprog suit program.
- Attachments
-
- Unbenannt.JPG (17.69 KiB) Viewed 5779 times
Re: Mistake in V7.0.0
An other fault in V7.
I close the main window in the compiler with X at the right side.
Then i open projekt from hard disk and the main window is empty.
I close the main window in the compiler with X at the right side.
Then i open projekt from hard disk and the main window is empty.
- danilo.milovic
- mikroElektronika team
- Posts: 501
- Joined: 05 Dec 2016 14:59
Re: Mistake in V7.0.0
Hi,
for the first question it does what is supposed to do, it closes mikroProg suite, because it is under mikroProg options.
As for second question I don't quite understand, what do you mean by the main window, window where is main function of project? You can reopen it in project manager, in right corner of your compiler.
Regards,
Danilo
for the first question it does what is supposed to do, it closes mikroProg suite, because it is under mikroProg options.
As for second question I don't quite understand, what do you mean by the main window, window where is main function of project? You can reopen it in project manager, in right corner of your compiler.
Regards,
Danilo
Re: Mistake in V7.0.0
Hello
On the second Picture i close the window with the X button.
Then i open a projekt from hard disk and i see the second picture.
The window is empty.
Where is the window with code ? Or what is the name of window
perhaps i will find it in the edit bar.
On the second Picture i close the window with the X button.
Then i open a projekt from hard disk and i see the second picture.
The window is empty.
Where is the window with code ? Or what is the name of window
perhaps i will find it in the edit bar.
- Attachments
-
- Unbenannt2.JPG (47.69 KiB) Viewed 5753 times
-
- Unbenannt1.JPG (66.53 KiB) Viewed 5753 times
- danilo.milovic
- mikroElektronika team
- Posts: 501
- Joined: 05 Dec 2016 14:59
Re: Mistake in V7.0.0
Hi,
in compiler go View >> Project Manager, then in the right corner open your project file and in sources folder click on test02.mbas, that will open main window again.
Regards,
Danilo
in compiler go View >> Project Manager, then in the right corner open your project file and in sources folder click on test02.mbas, that will open main window again.
Regards,
Danilo
Re: Mistake in V7.0.0
The Projekt Manager is empty.
Step by step.
The program test02 is in window.
1. picture close the window and it is empty. that is right.
2. picture open projekt test4
3. picture you see the projekt manager window on the right side is empty.
and the main window is empty.
Where is my mistake ?
Step by step.
The program test02 is in window.
1. picture close the window and it is empty. that is right.
2. picture open projekt test4
3. picture you see the projekt manager window on the right side is empty.
and the main window is empty.
Where is my mistake ?
- Attachments
-
- Unbenannt2.JPG (145.97 KiB) Viewed 5745 times
-
- Unbenannt3.jpg (496.57 KiB) Viewed 5745 times
-
- Unbenannt4.JPG (133.64 KiB) Viewed 5745 times
- danilo.milovic
- mikroElektronika team
- Posts: 501
- Joined: 05 Dec 2016 14:59
Re: Mistake in V7.0.0
Hi,
see the picutre in attach, when you open project from hard disk, project is open, all you have to do is click on the test02, as I've marked on the picture in the attach.
Regards,
Danilo
see the picutre in attach, when you open project from hard disk, project is open, all you have to do is click on the test02, as I've marked on the picture in the attach.
Regards,
Danilo
- Attachments
-
- picture.jpg (297.83 KiB) Viewed 5740 times
Re: Mistake in V7.0.0
No,
I open another file. Not the same file.
In the compiler goes to projekt ,open projekt and load a program.
Now you close the main window with X on the right corner button X.
Now you goes to projekt, open projekt and you search another file and open it.
You see the main window and the projekt manager is clear.
Do you now ?
I open another file. Not the same file.
In the compiler goes to projekt ,open projekt and load a program.
Now you close the main window with X on the right corner button X.
Now you goes to projekt, open projekt and you search another file and open it.
You see the main window and the projekt manager is clear.
Do you now ?
- danilo.milovic
- mikroElektronika team
- Posts: 501
- Joined: 05 Dec 2016 14:59
Re: Mistake in V7.0.0
Hi,
thank you for pointing this bug, I will send a report to our software department.
Regards,
Danilo
thank you for pointing this bug, I will send a report to our software department.
Regards,
Danilo
Re: Mistake in V7.0.0
Hello
In Version 7.01 is the same problem.
The problem is not solved.
In Version 7.01 is the same problem.
The problem is not solved.
Re: Mistake in V7.0.0
Changes introduced by v7.01 concern only TFT library.
Re: Mistake in V7.0.0
There is a three year minimum wait before they resolve reported issues. I had to wait over five years before they fixed some of the problems I was having, if your lucky they may work on it after they finish adding visualtft to the other compilers but don't hold your breath.Firewire wrote:Hello
In Version 7.01 is the same problem.
The problem is not solved.
Re: Mistake in V7.0.0
Hello
In Version 7.1.0 is the same problem.
The problem is not solved.
In Version 7.1.0 is the same problem.
The problem is not solved.
- danilo.milovic
- mikroElektronika team
- Posts: 501
- Joined: 05 Dec 2016 14:59
Re: Mistake in V7.0.0
Hi,
sorry for the inconvenience I have reported this issue again.
Regards,
Danilo
sorry for the inconvenience I have reported this issue again.
Regards,
Danilo
Re: Mistake in V7.0.0
Hello
In Version 7.2.0 is the same problem.
The problem is not solved.
In Version 7.2.0 is the same problem.
The problem is not solved.