PIC 10F320/322

Beta Testing discussion on mikroBasic PRO for PIC.
Post Reply
Author
Message
DonRecardo
Posts: 21
Joined: 09 Oct 2010 11:40
Location: Redditch UK

PIC 10F320/322

#1 Post by DonRecardo » 26 Mar 2014 18:18

Hi on the forum I saw a post regarding the pic 10F320/322 chips

The reply said it was hoped it would be supported in Easy Pic 7

I looked at Easy Pic 7 and yes it said it supports Pic10F

I then downloaded the latest Mikro Basic for Pic compiler but in the device
selection box there are no 10F series

Is there any Mikro Basic compiler that supports this chip ?

regards
Don
Top
User avatar
petar.timotijevic
mikroElektronika team
Posts: 1739
Joined: 19 Feb 2014 13:46
Location: Serbia
Contact:
Contact petar.timotijevic

Re: PIC 10F320/322

#2 Post by petar.timotijevic » 26 Mar 2014 22:09

Hello,

Our compilers support microcontrollers only with 14-bit or mode wide instructions, the PIC10F has 12-bit wide instructions, so this family is not supported by compiler.


Best regards,
Peter
Top
DonRecardo
Posts: 21
Joined: 09 Oct 2010 11:40
Location: Redditch UK

Re: PIC 10F320/322

#3 Post by DonRecardo » 27 Mar 2014 13:53

Thank you for your reply however

on the page for the easy Pic 7 it says it supports several of the PIC10F range

what is the point in this if there is no compiler for it ?

Regards
Don
Top
User avatar
petar.timotijevic
mikroElektronika team
Posts: 1739
Joined: 19 Feb 2014 13:46
Location: Serbia
Contact:
Contact petar.timotijevic

Re: PIC 10F320/322

#4 Post by petar.timotijevic » 27 Mar 2014 14:12

Hello,

Yes, EasyPICv7 supports PIC10F, you can use the code written in a different compiler or assembler.


Best regards,
Peter
Top
Post Reply

Return to “mikroBasic PRO for PIC Beta Testing”