I see the device list has the 18F13K22 and 18F14K22 in it already. A search found that this part was just added to the Pro C v3.8 package. This would be a super chip to have, as well as the 40-pin version, the 18F45K22.
Thanks for the attention.
kenjj
When will the 18F25K22 be added to BASIC Pro, V3 or V4
-
- Posts: 71
- Joined: 29 Dec 2004 05:16
- Location: North of Bay Area
When will the 18F25K22 be added to BASIC Pro, V3 or V4
Last edited by kjennejohn on 16 Aug 2010 17:07, edited 1 time in total.
All my pencils *used* to have erasers!
- slavisa.zlatanovic
- mikroElektronika team
- Posts: 1321
- Joined: 07 Apr 2009 09:39
Re: When will the 18F25K22 be added to BASIC Pro, V3 or V4
Hi!
P18F25K22 MCU is supported in our new mikroBasic PRO for PIC BETA v4.00.
Please, download it here:
http://www.mikroe.com/download/eng/soft ... 0_beta.zip
Best regards
Slavisa
P18F25K22 MCU is supported in our new mikroBasic PRO for PIC BETA v4.00.
Please, download it here:
http://www.mikroe.com/download/eng/soft ... 0_beta.zip
Best regards
Slavisa
Best regards
Slavisa
Slavisa
-
- Posts: 71
- Joined: 29 Dec 2004 05:16
- Location: North of Bay Area
Re: When will the 18F25K22 be added to BASIC Pro, V3 or V4
Thanks! That was quick.
kenjj
kenjj
All my pencils *used* to have erasers!
-
- Posts: 71
- Joined: 29 Dec 2004 05:16
- Location: North of Bay Area
Re: When will the 18F25K22 be added to BASIC Pro, V3 or V4
Not good!
I downloaded the beta 4 and it installed that and the vs 713 programmer software. I did a Compile&Program on the LEDBlink program after changing the device to a 18F25K22. No squawks fom the compile, but the programmer doesn't have ANY 18FxxKxx parts in the device list?!
kenjj
I downloaded the beta 4 and it installed that and the vs 713 programmer software. I did a Compile&Program on the LEDBlink program after changing the device to a 18F25K22. No squawks fom the compile, but the programmer doesn't have ANY 18FxxKxx parts in the device list?!
kenjj
All my pencils *used* to have erasers!
- slavisa.zlatanovic
- mikroElektronika team
- Posts: 1321
- Joined: 07 Apr 2009 09:39
Re: When will the 18F25K22 be added to BASIC Pro, V3 or V4
Hi!
In order to program the PIC18 "K" MCUs you need to install Lv18PICFlash programmer:
http://www.mikroe.com/eng/downloads/get ... r_v200.zip
Also, you need to use the EasyLV-18F v6 development system to program PIC18F25K22:
http://www.mikroe.com/eng/products/view ... nt-system/
In near future we plan to release the mikroProg universal stand alone all-PIC programmer.
Off course, it is going to be able to program "K" MCUs as well.
Best regards
Slavisa
In order to program the PIC18 "K" MCUs you need to install Lv18PICFlash programmer:
http://www.mikroe.com/eng/downloads/get ... r_v200.zip
Also, you need to use the EasyLV-18F v6 development system to program PIC18F25K22:
http://www.mikroe.com/eng/products/view ... nt-system/
In near future we plan to release the mikroProg universal stand alone all-PIC programmer.
Off course, it is going to be able to program "K" MCUs as well.
Best regards
Slavisa
Best regards
Slavisa
Slavisa
- tihomir.losic
- mikroElektronika team
- Posts: 2138
- Joined: 02 Dec 2009 14:16
- Location: Serbia
- Contact:
Re: When will the 18F25K22 be added to BASIC Pro, V3 or V4
Hello,
We are very pleased to present you with the new beta version of our universal programmer for all Microchip microcontrollers!
mikroProg Suite for PIC
This software is used for programming with ALL of Microchip microcontroller families which includes: PIC10F, PIC12F, PIC16F, PIC18F, PIC18F-K, PIC18F-J, PIC24F-KA, PIC24F-J, PIC24H-J, dsPIC30F, dsPIC30F-SMPS, dsPIC33F-J and PIC32MX.
It is compatible with all MikroElektronika programmers for Microchip devices.
Also, it is substitute for older programmer software that has been used for programming such as: PICFlash, dsPICFlash, Lv18PICFLASH, LvPICFLASH and PIC32FLASH software.
For more information, and download, please, follow this link:
http://www.mikroe.com/esupport/index.ph ... &newsid=13
Best regards,
Losic Tihomir
We are very pleased to present you with the new beta version of our universal programmer for all Microchip microcontrollers!
mikroProg Suite for PIC
This software is used for programming with ALL of Microchip microcontroller families which includes: PIC10F, PIC12F, PIC16F, PIC18F, PIC18F-K, PIC18F-J, PIC24F-KA, PIC24F-J, PIC24H-J, dsPIC30F, dsPIC30F-SMPS, dsPIC33F-J and PIC32MX.
It is compatible with all MikroElektronika programmers for Microchip devices.
Also, it is substitute for older programmer software that has been used for programming such as: PICFlash, dsPICFlash, Lv18PICFLASH, LvPICFLASH and PIC32FLASH software.
For more information, and download, please, follow this link:
http://www.mikroe.com/esupport/index.ph ... &newsid=13
Best regards,
Losic Tihomir
mikroElektronika [Support team]