Manchechester Speed Choices

[pykedgew]

Hi To The Wishing Team

Have use your Manchester library function & it work well, although with one limitation, fixed value.
What will be great, if the user can have a choice of changing the timing speed or baud rate.

At the moment it is set for 2mSec or 500bps.
Example
250uS (4000bps) 500uS(2000bps) 1mS(1000bps) 2mS(500bps) 4(250bps)
or
9600bps, 4800bps, 2400bps, 1200bps, 600bps, 300bps

Maybe the user can input their own value likes 5000bps.

Regards
Ken

[filip]

Hi,

Currently, baud rate.of the Manchester code is fixed and set to 500bps.

Thank you for your suggestion, we will consider implementing changeable baud rate feature.

Regards,
Filip.

[cnurettin]

Hi ,

Is 500bps fixed in MikroPascal PRO for manchester ?

I must use 2400bps . How can i use 2400bps with Mikro pascal PRO ?

And i have a clock signal. But manchester library not support clock. Only support manchester send and receive ...


Best Regards,

[pykedgew]

Hi cnurettin

Is 500bps fixed in MikroPascal PRO for manchester ?

Sadly, yes at the moment.

Ken

[tihomir.losic]

I must use 2400bps . How can i use 2400bps with Mikro pascal PRO ?

And i have a clock signal. But manchester library not support clock. Only support manchester send and receive ...

Hello,

our procedure Man_Send sends one byte, and the Baud rate used is 500 bps.
You can change baud rate by writing your custom library, where you'll able to set baud rate
on value which you need.

Best regards,

Losic Tihomir

[noordschanser]

Speed choice would be very helpfull with al lot of communications protocols on IR, 433MHz, etc.

[tihomir.losic]

Hello,

I will pass that suggestion to our developers,
they will take this into consideration in our future development.

Thank you for your proposal.

Best regards,

Losic Tihomir