Please correct following errors from MP7 version help :
1. I2C Library , schematic, Interfacing 24c02 to PIC via I²C
RC3(SCL) must be connected with pin 6 SCL from 24C02
RC4(SDA) must be connected with pin 5 SDA from 24C02
2. CAN Library , example of interfacing CAN transceiver with MCU and bus
RXD must be connected with CAN RX from PIC
TX CAN must be connected with CAN TX from PIC
3. Conversion Library , StrToInt ,StrToWord
Code: Select all
ii := StrToInt("-1234");
ww := StrToword("65432");
Thanks.