How or where I could use the MikroProg on this IDE?
To replicate error: Just compile on a custom settings and then upload it.
Here's the error:
Code: Select all
Programming target: H:/stm32-projects-2019/build-u8g2_stm32_test_necto-mikrocarm-generic-stm32f100rb-1-mhz/u8g2_stm32_test_necto/u8g2_stm32_test_necto.hex
Starting operation...
There is no selected device.
Can we get this fixed? This compiler should have address fundamental issues such as programmer support before going to other things.