Page 1 of 1
thermal camera tutorial on stm32 m4
Posted: 14 May 2020 14:26
by dm93
Anyone have tips on modifying the 'Let's make - Thermal Camera' tutorial to run on mikroMedia for STM32 M4? It builds cleanly and I uploaded the hex and all it displays on the lcd is a white screen. Other graphical examples from mikromedia_for_STM32_M4 bundle work. Thank you.
Re: thermal camera tutorial on stm32 m4
Posted: 15 May 2020 14:22
by filip
Hi,
Most likely the TFT controller is different, which one is initialized in your code ?
Regards,
Filip.
Re: thermal camera tutorial on stm32 m4
Posted: 15 May 2020 15:49
by dm93
Hi - just starting out.
In edit project, Hardware Patterns: Mikromedia_Plus_for_STM32_ARM changed to mikromedia_for_STM32_M4.
There was a message about merging code that needed to be done manually.
After that was done I selected TFT_TouchPanel in Library Manager and it compiled.
Appreciate any help you can give.
Re: thermal camera tutorial on stm32 m4
Posted: 18 May 2020 13:54
by filip
Hi,
Can you please attach the detailed photo of the mikromedia board, so I could see the markings on the TFT ?
Regards,
Filip.
Re: thermal camera tutorial on stm32 m4
Posted: 19 May 2020 03:50
by dm93
- IMG_2002.jpg (1.85 MiB) Viewed 2088 times
- IMG_2005.jpg (2.15 MiB) Viewed 2088 times
Re: thermal camera tutorial on stm32 m4
Posted: 20 May 2020 14:56
by filip
Hi,
How did you connect the IR Grid click board to the mikromedia ?
Regards,
Filip.