MPLABX b6.05 and Codegrip v1.6.3

[kamputty]

Hi all,

Using latest codegrip firmware 1.6.3

Has anyone got codegrip working with MPLABX 6.05? Every time I flash I get the following message...

MPLAB X was unable to determine version of installed CODEGRIP Suite.
Please reinstall CODEGRIP Suite from: http://www.mikroe.com/setup/codegrip

I tried downgrading MPLABX to v5.5, and got the following message

.
.
.
Range: 0x1fc01740 - 0x1fc0174f...Complete
Range: 0x1fc01760 - 0x1fc0176f...Complete
Range: 0x1fc01780 - 0x1fc0178f...Complete
Range: 0x1fc017a0 - 0x1fc017af...Complete
Range: 0x1fc017c0 - 0x1fc017cf...Complete
Range: 0x1fc017e0 - 0x1fc017ef...Complete
Range: 0x1fc01800 - 0x1fc0180f...Complete
Range: 0x1fc01820 - 0x1fc0182f...Complete
Range: 0x1fc01840 - 0x1fc0184f...Complete
Range: 0x1fc01860 - 0x1fc0186f...Complete

Erasing...

--------------------------
CODEGRIP returned an error
* code: [53]
* message: [Connecting to target failed.]

[kamputty]

Hi all,

Okay, some progress...

For the v5.50 MPLABX, I had to configure the CodeGrip as a "2-wire" device, and now it works...

Still no love with v6.05...

~Kam

[filip]

Hi,

I apologize for the inconvenience caused by this, this is a known issue which we will hopefully fix soon.

Regards,
Filip.

[SymbiosisSystems]

Hi Filip,

Is there any update on this issue ? I've just purchased a Fusion for PIC32 v8 and using MPLAB X v6.05 and I'm having the same issue. If there isn't a fix available yet, is there a workaround ?

Many thanks,

Jon