hi
am getting error while compiling all my previous program.
then i tried example program. Now checking interrupt1 timer example. But while compiling example program also it showing error
in lib_delay.c..
it point to delay_ms(1000);
and the error is : Undeclared identifier '__multiply_32x32' in expression.
Screen shot is attached. kindly check and do the needful.
Showing Error in __Lib_delays.c
-
- Posts: 38
- Joined: 08 Sep 2016 14:17
Showing Error in __Lib_delays.c
- Attachments
-
- error.jpg (298.95 KiB) Viewed 3295 times
Re: Showing Error in __Lib_delays.c
Hi,
Please, can you attach the minimal project that demonstrates this issue ?
Regards,
Filip.
Please, can you attach the minimal project that demonstrates this issue ?
Regards,
Filip.
-
- Posts: 38
- Joined: 08 Sep 2016 14:17
Re: Showing Error in __Lib_delays.c
Hi,
I have taken it from example folder..
Anyway i attached that example with this post.
And please note that the programs which was build successfully before also getting failure now.
Kindly do the needful.
Merry Christmas..
Regards,
Nikhil
I have taken it from example folder..
Anyway i attached that example with this post.
And please note that the programs which was build successfully before also getting failure now.
Kindly do the needful.
Merry Christmas..
Regards,
Nikhil
- Attachments
-
- Timer1 Interrupt.rar
- (54.1 KiB) Downloaded 132 times
Re: Showing Error in __Lib_delays.c
I see you are using an old version of the compiler.
First thing I would try is removing the old version 6 compiler and installing current version.
Your code compiles without error for me, using compiler 7.0.1
First thing I would try is removing the old version 6 compiler and installing current version.
Your code compiles without error for me, using compiler 7.0.1
Start every day with a smile...... (get it over with)
-
- Posts: 38
- Joined: 08 Sep 2016 14:17
Re: Showing Error in __Lib_delays.c
Thank you for your Reply Sir.
But i didn't changed the compiler. Unless there is no change in compiler it should work with its original compiler right.
It will work with New compiler but my few programs developed in old compiler and it was working well.
Without changing any compiler version how can it throws error?
That is making me confuse.
kindly suggest me a solution. If this problem can overcome without changing compiler version it will be better.
---
Nikhil
But i didn't changed the compiler. Unless there is no change in compiler it should work with its original compiler right.
It will work with New compiler but my few programs developed in old compiler and it was working well.
Without changing any compiler version how can it throws error?
That is making me confuse.
kindly suggest me a solution. If this problem can overcome without changing compiler version it will be better.
---
Nikhil
- strahinja.jacimovic
- mikroElektronika team
- Posts: 200
- Joined: 18 Dec 2017 18:19
Re: Showing Error in __Lib_delays.c
Hi,
I have tried to recreate the problem you have been getting, but without any success.
I used the version you are using as well, version 6.21.
There must be something wrong with your compilers libraries.
Try and download the same version again and install it.
Here is the link: http://download.mikroe.com/setups/compi ... p-v621.zip
Kind regards,
I have tried to recreate the problem you have been getting, but without any success.
I used the version you are using as well, version 6.21.
There must be something wrong with your compilers libraries.
Try and download the same version again and install it.
Here is the link: http://download.mikroe.com/setups/compi ... p-v621.zip
Kind regards,
- Attachments
-
- 2017-12-26_10-13-22.jpg (72.73 KiB) Viewed 3250 times
Strahinja Jacimovic
-
- Posts: 38
- Joined: 08 Sep 2016 14:17
Re: Showing Error in __Lib_delays.c
After re-installation it works fine
i dont know what happened with older one
Thank you for sharing the link.
....
i dont know what happened with older one
Thank you for sharing the link.
....
- strahinja.jacimovic
- mikroElektronika team
- Posts: 200
- Joined: 18 Dec 2017 18:19