Dspic33fj128gp802 Argument out of range

[Alexcaes91]

I tried to compile a code in mikroc for dspic v6.2.0 but when i do it, the program shows an "argument out of range" message. This code was already compiled in mikroc for pic v6.6.2 without any issues. This is the code:

// Bah, signed variables are for wimps
#define uchar unsigned char
#define uint unsigned long

// DBL_INT_ADD treats two unsigned ints a and b as one 64-bit integer and adds c to it
#define DBL_INT_ADD(a,b,c) if (a > 0xffffffff - c) ++b; a += c;
#define ROTLEFT(a,b) ((a << b) | (a >> (32-b)))

#define F(x,y,z) ((x & y) | (~x & z))
#define G(x,y,z) ((x & z) | (y & ~z))
#define H(x,y,z) (x ^ y ^ z)
#define I(x,y,z) (y ^ (x | ~z))

#define FF(a,b,c,d,m,s,t) { a += F(b,c,d) + m + t; \
a = b + ROTLEFT(a,s); }
#define GG(a,b,c,d,m,s,t) { a += G(b,c,d) + m + t; \
a = b + ROTLEFT(a,s); }
#define HH(a,b,c,d,m,s,t) { a += H(b,c,d) + m + t; \
a = b + ROTLEFT(a,s); }
#define II(a,b,c,d,m,s,t) { a += I(b,c,d) + m + t; \
a = b + ROTLEFT(a,s); }

//unsigned long longitud;

void md5_transform(MD5_CTX *ctx, uchar *datos)
{
uint a,b,c,d,m[16];
char i,j;
j = 0;
// MD5 specifies big endian byte order, but this implementation assumes a little
// endian byte order CPU. Reverse all the bytes upon input, and re-reverse them
// on output (in md5_final()).
for (i=0; i < 16; ++i){
m = datos[j+3];
m = (m << + datos[j+2];
m = (m << + datos[j+1];
m = (m << + datos[j];
j += 4;
}
a = ctx->state[0];
b = ctx->state[1];
c = ctx->state[2];
d = ctx->state[3];

FF(a,b,c,d,m[0], 7,0xd76aa478);
FF(d,a,b,c,m[1], 12,0xe8c7b756);
FF(c,d,a,b,m[2], 17,0x242070db);
FF(b,c,d,a,m[3], 22,0xc1bdceee);
FF(a,b,c,d,m[4], 7,0xf57c0faf);
FF(d,a,b,c,m[5], 12,0x4787c62a);
FF(c,d,a,b,m[6], 17,0xa8304613);
FF(b,c,d,a,m[7], 22,0xfd469501);
FF(a,b,c,d,m[8], 7,0x698098d8);
FF(d,a,b,c,m[9], 12,0x8b44f7af);
FF(c,d,a,b,m[10],17,0xffff5bb1);
FF(b,c,d,a,m[11],22,0x895cd7be);
FF(a,b,c,d,m[12], 7,0x6b901122);
FF(d,a,b,c,m[13],12,0xfd987193);
FF(c,d,a,b,m[14],17,0xa679438e);
FF(b,c,d,a,m[15],22,0x49b40821);

GG(a,b,c,d,m[1], 5,0xf61e2562);
GG(d,a,b,c,m[6], 9,0xc040b340);
GG(c,d,a,b,m[11],14,0x265e5a51);
GG(b,c,d,a,m[0], 20,0xe9b6c7aa);
GG(a,b,c,d,m[5], 5,0xd62f105d);
GG(d,a,b,c,m[10], 9,0x02441453);
GG(c,d,a,b,m[15],14,0xd8a1e681);
GG(b,c,d,a,m[4], 20,0xe7d3fbc8);
GG(a,b,c,d,m[9], 5,0x21e1cde6);
GG(d,a,b,c,m[14], 9,0xc33707d6);
GG(c,d,a,b,m[3], 14,0xf4d50d87);
GG(b,c,d,a,m[8], 20,0x455a14ed);
GG(a,b,c,d,m[13], 5,0xa9e3e905);
GG(d,a,b,c,m[2], 9,0xfcefa3f8);
GG(c,d,a,b,m[7], 14,0x676f02d9);
GG(b,c,d,a,m[12],20,0x8d2a4c8a);

HH(a,b,c,d,m[5], 4,0xfffa3942);
HH(d,a,b,c,m[8], 11,0x8771f681);
HH(c,d,a,b,m[11],16,0x6d9d6122);
HH(b,c,d,a,m[14],23,0xfde5380c);
HH(a,b,c,d,m[1], 4,0xa4beea44);
HH(d,a,b,c,m[4], 11,0x4bdecfa9);
HH(c,d,a,b,m[7], 16,0xf6bb4b60);
HH(b,c,d,a,m[10],23,0xbebfbc70);
HH(a,b,c,d,m[13], 4,0x289b7ec6);
HH(d,a,b,c,m[0], 11,0xeaa127fa);
HH(c,d,a,b,m[3], 16,0xd4ef3085);
HH(b,c,d,a,m[6], 23,0x04881d05);
HH(a,b,c,d,m[9], 4,0xd9d4d039);
HH(d,a,b,c,m[12],11,0xe6db99e5);
HH(c,d,a,b,m[15],16,0x1fa27cf8);
HH(b,c,d,a,m[2], 23,0xc4ac5665);

II(a,b,c,d,m[0], 6,0xf4292244);
II(d,a,b,c,m[7], 10,0x432aff97);
II(c,d,a,b,m[14],15,0xab9423a7);
II(b,c,d,a,m[5], 21,0xfc93a039);
II(a,b,c,d,m[12], 6,0x655b59c3);
II(d,a,b,c,m[3], 10,0x8f0ccc92);
II(c,d,a,b,m[10],15,0xffeff47d);
II(b,c,d,a,m[1], 21,0x85845dd1);
II(a,b,c,d,m[8], 6,0x6fa87e4f);
II(d,a,b,c,m[15],10,0xfe2ce6e0);
II(c,d,a,b,m[6], 15,0xa3014314);
II(b,c,d,a,m[13],21,0x4e0811a1);
II(a,b,c,d,m[4], 6,0xf7537e82);
II(d,a,b,c,m[11],10,0xbd3af235);
II(c,d,a,b,m[2], 15,0x2ad7d2bb);
II(b,c,d,a,m[9], 21,0xeb86d391);

ctx->state[0] += a;
ctx->state[1] += b;
ctx->state[2] += c;
ctx->state[3] += d;
}

The error seems to be in the line "FF(a,b,c,d,m[0], 7,0xd76aa478);". If anyone has any idea what can be wrong, please help. Sorry for my english... XD

[lana.arsic]

Hi Alexcaes91,

Welcome to the MikroE forum.

Part of the code which you have posted
doesn't compile because there is missing declaration for MD5_CTX,
also there is no main function declared.

You can try this code in version 7.0.0
(it is almost the same as code which you have posted, but with added missing declarations):

Code: Select all

// Bah, signed variables are for wimps
#define uchar unsigned char
#define uint unsigned long

// DBL_INT_ADD treats two unsigned ints a and b as one 64-bit integer and adds c to it
#define DBL_INT_ADD(a,b,c) if (a > 0xffffffff - c) ++b; a += c;
#define ROTLEFT(a,b) ((a << b) | (a >> (32-b)))

#define F(x,y,z) ((x & y) | (~x & z))
#define G(x,y,z) ((x & z) | (y & ~z))
#define H(x,y,z) (x ^ y ^ z)
#define I(x,y,z) (y ^ (x | ~z))

#define FF(a,b,c,d,m,s,t) { a += F(b,c,d) + m + t; \
a = b + ROTLEFT(a,s); }
#define GG(a,b,c,d,m,s,t) { a += G(b,c,d) + m + t; \
a = b + ROTLEFT(a,s); }
#define HH(a,b,c,d,m,s,t) { a += H(b,c,d) + m + t; \
a = b + ROTLEFT(a,s); }
#define II(a,b,c,d,m,s,t) { a += I(b,c,d) + m + t; \
a = b + ROTLEFT(a,s); }

//unsigned long longitud;

typedef struct {
    unsigned int state[4];
}MD5_CTX;

void md5_transform(MD5_CTX *ctx, uchar *datos)
{
uint a,b,c,d,m[16];
char i,j;
j = 0;
// MD5 specifies big endian byte order, but this implementation assumes a little
// endian byte order CPU. Reverse all the bytes upon input, and re-reverse them
// on output (in md5_final()).
for (i=0; i < 16; ++i){
m[i] = datos[j+3];
m[i] = (m[i] << 8) + datos[j+2];
m[i] = (m[i] << 8) + datos[j+1];
m[i] = (m[i] << 8) + datos[j];
j += 4;
}
a = ctx->state[0];
b = ctx->state[1];
c = ctx->state[2];
d = ctx->state[3];

FF(a,b,c,d,m[0], 7,0xd76aa478);
FF(d,a,b,c,m[1], 12,0xe8c7b756);
FF(c,d,a,b,m[2], 17,0x242070db);
FF(b,c,d,a,m[3], 22,0xc1bdceee);
FF(a,b,c,d,m[4], 7,0xf57c0faf);
FF(d,a,b,c,m[5], 12,0x4787c62a);
FF(c,d,a,b,m[6], 17,0xa8304613);
FF(b,c,d,a,m[7], 22,0xfd469501);
FF(a,b,c,d,m[8], 7,0x698098d8);
FF(d,a,b,c,m[9], 12,0x8b44f7af);
FF(c,d,a,b,m[10],17,0xffff5bb1);
FF(b,c,d,a,m[11],22,0x895cd7be);
FF(a,b,c,d,m[12], 7,0x6b901122);
FF(d,a,b,c,m[13],12,0xfd987193);
FF(c,d,a,b,m[14],17,0xa679438e);
FF(b,c,d,a,m[15],22,0x49b40821);

GG(a,b,c,d,m[1], 5,0xf61e2562);
GG(d,a,b,c,m[6], 9,0xc040b340);
GG(c,d,a,b,m[11],14,0x265e5a51);
GG(b,c,d,a,m[0], 20,0xe9b6c7aa);
GG(a,b,c,d,m[5], 5,0xd62f105d);
GG(d,a,b,c,m[10], 9,0x02441453);
GG(c,d,a,b,m[15],14,0xd8a1e681);
GG(b,c,d,a,m[4], 20,0xe7d3fbc8);
GG(a,b,c,d,m[9], 5,0x21e1cde6);
GG(d,a,b,c,m[14], 9,0xc33707d6);
GG(c,d,a,b,m[3], 14,0xf4d50d87);
GG(b,c,d,a,m[8], 20,0x455a14ed);
GG(a,b,c,d,m[13], 5,0xa9e3e905);
GG(d,a,b,c,m[2], 9,0xfcefa3f8);
GG(c,d,a,b,m[7], 14,0x676f02d9);
GG(b,c,d,a,m[12],20,0x8d2a4c8a);

HH(a,b,c,d,m[5], 4,0xfffa3942);
HH(d,a,b,c,m[8], 11,0x8771f681);
HH(c,d,a,b,m[11],16,0x6d9d6122);
HH(b,c,d,a,m[14],23,0xfde5380c);
HH(a,b,c,d,m[1], 4,0xa4beea44);
HH(d,a,b,c,m[4], 11,0x4bdecfa9);
HH(c,d,a,b,m[7], 16,0xf6bb4b60);
HH(b,c,d,a,m[10],23,0xbebfbc70);
HH(a,b,c,d,m[13], 4,0x289b7ec6);
HH(d,a,b,c,m[0], 11,0xeaa127fa);
HH(c,d,a,b,m[3], 16,0xd4ef3085);
HH(b,c,d,a,m[6], 23,0x04881d05);
HH(a,b,c,d,m[9], 4,0xd9d4d039);
HH(d,a,b,c,m[12],11,0xe6db99e5);
HH(c,d,a,b,m[15],16,0x1fa27cf8);
HH(b,c,d,a,m[2], 23,0xc4ac5665);

II(a,b,c,d,m[0], 6,0xf4292244);
II(d,a,b,c,m[7], 10,0x432aff97);
II(c,d,a,b,m[14],15,0xab9423a7);
II(b,c,d,a,m[5], 21,0xfc93a039);
II(a,b,c,d,m[12], 6,0x655b59c3);
II(d,a,b,c,m[3], 10,0x8f0ccc92);
II(c,d,a,b,m[10],15,0xffeff47d);
II(b,c,d,a,m[1], 21,0x85845dd1);
II(a,b,c,d,m[8], 6,0x6fa87e4f);
II(d,a,b,c,m[15],10,0xfe2ce6e0);
II(c,d,a,b,m[6], 15,0xa3014314);
II(b,c,d,a,m[13],21,0x4e0811a1);
II(a,b,c,d,m[4], 6,0xf7537e82);
II(d,a,b,c,m[11],10,0xbd3af235);
II(c,d,a,b,m[2], 15,0x2ad7d2bb);
II(b,c,d,a,m[9], 21,0xeb86d391);

ctx->state[0] += a;
ctx->state[1] += b;
ctx->state[2] += c;
ctx->state[3] += d;
}

void main(){
}

Best regards,
Lana

[Alexcaes91]

Hi lana

The code already compiled it in "mikroc for pic" specifically in pic 18f47j53 without any problem.
I send you the complete program. The error is in the file md5.c in the line that I showed previously.

[lana.arsic]

Hi,

I believe I have answered you on the ticket regarding this issue,
so I suggest to continue our correspondence there.

Best regards,
Lana