Hi
Can you PLEASE, PLEASE ,PLEASE clean up the library documentation, especially that which pertains to internal ethernet library.
Help files seem to be lifted straight from ARM compiler and refer to functions such as Putbyte that don't exist in this compiler.
Many return values are also wrong.
I have lost weeks of work due to poor documentation and examples in libraries. Information that should be readily available has to be found by trial and error. Might be fun for hobbyists but deadly in a production environment.
I am sure that if you improve accuracy and breadth of documentation you will reduce load on your support team.
thanks
MicroC Pro FT90X library documentation unsatisfactory
- Aleksandar.Mitrovic
- mikroElektronika team
- Posts: 1697
- Joined: 11 Mar 2015 12:48
Re: MicroC Pro FT90X library documentation unsatisfactory
Hi Alan,
I'm sorry if you had any problems with our library functions and examples.
Can you please point me to right directions in the Help file?
We would try to correct all errors in the Help file as soon as possible.
Best regards,
Aleksandar
I'm sorry if you had any problems with our library functions and examples.
Can you please point me to right directions in the Help file?
We would try to correct all errors in the Help file as soon as possible.
Best regards,
Aleksandar
Re: MicroC Pro FT90X library documentation unsatisfactory
Hi Aleksander,
To begin
Which library should I be using.....
the Ethernet internal library that comes with compiler using commands like Ethernet_Intern_Init
or the library on Libstock which I found tonight by accident using commands like Net_Ethernet_Intern_Init ??
I had some success with the former (I was able to eventually get DHCP going after many weeks).
Now trying unsuccessfully so far with the latter.
To begin
Which library should I be using.....
the Ethernet internal library that comes with compiler using commands like Ethernet_Intern_Init
or the library on Libstock which I found tonight by accident using commands like Net_Ethernet_Intern_Init ??
I had some success with the former (I was able to eventually get DHCP going after many weeks).
Now trying unsuccessfully so far with the latter.
Re: MicroC Pro FT90X library documentation unsatisfactory
There is also a bug in the PWM Click for Micro C Pro - FT90X
in the PWM Click.c file
You have
sbit PCA9685_EN at GPIO_PORT_00_07.B0;
after finding the sample code and board did not work out of the box I checked schematics
should be
sbit PCA9685_EN at GPIO_PORT_00_07.B1;
now working fine.
I like you guys and I like your products but I am starting to think that FT90x has been released without full testing.
in the PWM Click.c file
You have
sbit PCA9685_EN at GPIO_PORT_00_07.B0;
after finding the sample code and board did not work out of the box I checked schematics
should be
sbit PCA9685_EN at GPIO_PORT_00_07.B1;
now working fine.
I like you guys and I like your products but I am starting to think that FT90x has been released without full testing.
- Aleksandar.Mitrovic
- mikroElektronika team
- Posts: 1697
- Joined: 11 Mar 2015 12:48
Re: MicroC Pro FT90X library documentation unsatisfactory
Hi Alan,
Can you please tell me which hardware are you using?
Ethernet from the board?
*There is also a bug in the PWM Click for Micro C Pro - FT90X
- We will fix this. Thank you for reporting it.
Best regards,
Aleksandar
Can you please tell me which hardware are you using?
Ethernet from the board?
*There is also a bug in the PWM Click for Micro C Pro - FT90X
- We will fix this. Thank you for reporting it.
Best regards,
Aleksandar
Re: MicroC Pro FT90X library documentation unsatisfactory
Hi Aleksandar,
I am using the onboard Ethernet Connector on EasyFT90x
I am using the onboard Ethernet Connector on EasyFT90x
- Aleksandar.Mitrovic
- mikroElektronika team
- Posts: 1697
- Joined: 11 Mar 2015 12:48
Re: MicroC Pro FT90X library documentation unsatisfactory
Hi Alan,
You should be using the example from the compiler folder:
...\Documents\Mikroelektronika\mikroC PRO for FT90x\Examples\EasyFT90x V7\Ethernet Demo
And you use "Ethernet Library" functions for this.
Best regards,
Aleksandar
You should be using the example from the compiler folder:
...\Documents\Mikroelektronika\mikroC PRO for FT90x\Examples\EasyFT90x V7\Ethernet Demo
And you use "Ethernet Library" functions for this.
Best regards,
Aleksandar