Problem on debugging the HID Read Write Polling

Post your requests and ideas on the future development of mikroC PRO for FT90x.
Post Reply
Author
Message
surapong
Posts: 2
Joined: 15 Apr 2015 07:56

Problem on debugging the HID Read Write Polling

#1 Post by surapong » 15 Apr 2015 12:44

I m starting to use USB interface with my PIC18F4550 platform. Then, i tested with an example provided by the compiler, either HID Read Write Polling or HID Read Write Interrupt. In building process, the projects can be finely compiled (may be there is some internal error, however no report), but there is a problem with Debugging sequence as shown in the attached figure. As soon as i start debugger the error pops up.

Please any expertise tell me what happen with that. Thank you all in advance.
Attachments
mikroCerror1.png
mikroCerror1.png (206.2 KiB) Viewed 2937 times
Top
rmteo
Posts: 1330
Joined: 19 Oct 2006 17:46
Location: Colorado, USA

Re: Problem on debugging the HID Read Write Polling

#2 Post by rmteo » 16 Apr 2015 02:52

Wrong forum. This is for the FT90x.
Why pay for overpriced toys when you can have
professional grade tools for FREE!!! :D :D :D
Top
User avatar
darko.minic
Posts: 747
Joined: 01 Dec 2014 11:10

Re: Problem on debugging the HID Read Write Polling

#3 Post by darko.minic » 16 Apr 2015 10:55

Hi,

With which hardware did you tried to debug PIC18F4550.
Can you send me project which you have compiled so I can try to reproduce the problem on my computer?

Regards,
Darko
Top
Post Reply

Return to “mikroC PRO for FT90x Wish List”