GIGADEVICE support

General discussion on mikroPascal PRO for ARM.
Post Reply
Author
Message
qwepoi
Posts: 68
Joined: 14 Apr 2013 14:14

GIGADEVICE support

#1 Post by qwepoi » 29 Jul 2022 07:59

Any plans to add support for GIGADEVICE IC's ?
Top
User avatar
Tanja_Kovacevic
mikroElektronika team
Posts: 98
Joined: 09 Aug 2021 11:39

Re: GIGADEVICE support

#2 Post by Tanja_Kovacevic » 26 Aug 2022 11:27

Hi,

We have supported GD32VF in mikroSDK.

You can download the newest Necto Studio from our product page:
https://www.mikroe.com/necto
and check the list of supported MCUs:
https://www.mikroe.com/necto#supported-mcus

Kind regards,
Tanja
Top
qwepoi
Posts: 68
Joined: 14 Apr 2013 14:14

Re: GIGADEVICE support

#3 Post by qwepoi » 28 Aug 2022 10:43

Hi Tanja
The question was about mikropascal AMR compiler , are you going to add support for those devices or shop people how to do it ?
Thank you
Top
keyboardpartner
Posts: 1
Joined: 06 Jul 2022 14:36

Re: GIGADEVICE support

#4 Post by keyboardpartner » 06 Jan 2023 08:54

Hi qwepoi,

I just made a quite large project including Bootloader and VisualTFT with MikroE ARM Pascal running on a GD32F303RET6. A similar ST device is the STM32F103RET6 (not 303!) which I set in project settings. This worked without problems, just the Delay_ms() times are much too short, as the GD has a Cortex M4 core. Used Vdelay_ms() instead.

Even CodeGRIP and mikroProg debugger work with this device.

Greetings, Carsten
--
Greetings, Carsten
Top
Post Reply

Return to “mikroPascal PRO for ARM General”