Good day
It would be good to have a library that gives you access to enable all the functions for the LoRa range of devices, I refer to one for 868Mhz band but they also have for the other band 433 and 915, it should expose the LoRa WAN functions and M2M functions, currently have to make use of code in the Keil toolchain, it would be far better in the MikroC environment.
Thank You
LoRa SX1276
- darko.ilijevski
- Posts: 581
- Joined: 21 Mar 2017 16:57
Re: LoRa SX1276
Hello,
Our click boards use modules made by the MicroChip company and as such, offer all the functionality which is provided by the MicroChip, inside our libraries. Library help file is a very useful source for an info on particular functions of the module, also there you can see the list of all available libraries. The module itself, is MicroChip's property and it's not an open source platform, so we can't provide anything beyond the module itself.
Best regards
Our click boards use modules made by the MicroChip company and as such, offer all the functionality which is provided by the MicroChip, inside our libraries. Library help file is a very useful source for an info on particular functions of the module, also there you can see the list of all available libraries. The module itself, is MicroChip's property and it's not an open source platform, so we can't provide anything beyond the module itself.
Best regards
BR,
Darko
Darko
Re: LoRa SX1276
Hi
Thanks for your reply, the Microchip LoRa module comes preprogrammed with the basic functions, this is done with in the Pic in the LoRa module, so setting data on the SX1276 is not possible, that been the reason for asking if a Library is possible for the SX1276 directly.
So trying to use the MicroChip Click LoRa module commands would not work
Regards
Sam
Thanks for your reply, the Microchip LoRa module comes preprogrammed with the basic functions, this is done with in the Pic in the LoRa module, so setting data on the SX1276 is not possible, that been the reason for asking if a Library is possible for the SX1276 directly.
So trying to use the MicroChip Click LoRa module commands would not work
Regards
Sam
- darko.ilijevski
- Posts: 581
- Joined: 21 Mar 2017 16:57
Re: LoRa SX1276
Hi,
Well - we do not have such libraries in our compilers... I understand why you ask, but sadly we can provide only libraries for driving the module itself (MCU with the SX1276) and not the SX1276 alone.
Best regards.
Well - we do not have such libraries in our compilers... I understand why you ask, but sadly we can provide only libraries for driving the module itself (MCU with the SX1276) and not the SX1276 alone.
Best regards.
BR,
Darko
Darko
Re: LoRa SX1276
Hi
Thanks for your reply, is there somebody in the forum that you can suggest that would be able to do this type of conversion from Keil to miroC and maybe from that create useable library for MicroC
Regards
Sam
Thanks for your reply, is there somebody in the forum that you can suggest that would be able to do this type of conversion from Keil to miroC and maybe from that create useable library for MicroC
Regards
Sam