GSMGNSS 2 click Problem with uart

General discussion on mikroC PRO for ARM.
Post Reply
Author
Message
iqsoft
Posts: 6
Joined: 12 Aug 2022 11:14

GSMGNSS 2 click Problem with uart

#1 Post by iqsoft » 31 Aug 2022 15:16

I am using the tiva V8 developments board with the TM4C129XNCZAD arm, GSMGNSS 2 click and mikroC. I load the example code from the libstock (https://libstock.mikroe.com/projects/vi ... ss-2-click MikroC for ARM). Then i see that the uart on board is working properly. The led on the usb/uart lights up as the tiva board sends data to the serial port. I am using putty to see the received data and i see "
??" on the terminal. I also tried loading the UART example from the basic libraries. The uart was working properly and i received correct data. When I import the library for the GSMGNSS2 click board that i already mentioned the serail port receives "???" again. Any ideas how to fix this?
Top
User avatar
IvanJeremic
mikroElektronika team
Posts: 316
Joined: 05 Sep 2022 14:32

Re: GSMGNSS 2 click Problem with uart

#2 Post by IvanJeremic » 08 Sep 2022 13:08

Hi,

Are you sure you have set the baudrate right?

Regards,

Ivan.
Top
Post Reply

Return to “mikroC PRO for ARM General”