Need USB Virtual Com Port C code for LM3S9B95

General discussion on mikroC PRO for ARM.
Post Reply
Author
Message
munishK301
Posts: 30
Joined: 08 Feb 2012 07:04

Need USB Virtual Com Port C code for LM3S9B95

#1 Post by munishK301 » 23 Feb 2012 05:53

Hello Sir,

Our Team is working on your MMB board for LM3S9B95.
Please kindly provide us a c code for USB Virtual Com Port for LM3S9B95.
we want to use the USB port as Serial COM port using Hyperterminal.

Thanking You,

Munish K
ESICO, India
Top
p.erasmus
Posts: 3391
Joined: 05 Mar 2009 10:28

Re: Need USB Virtual Com Port C code for LM3S9B95

#2 Post by p.erasmus » 23 Feb 2012 10:09

As far as I know there is no C code available for ARM (CDC) implementation(mikroC), for Microchip Devices there are such C code :D available from Microchip and mikroC users.
So I guess you will have to write your own CDC drivers
P.Erasmus
Saratov,Russia
--------------------------------------------------------------
Top
munishK301
Posts: 30
Joined: 08 Feb 2012 07:04

Re: Need USB Virtual Com Port C code for LM3S9B95

#3 Post by munishK301 » 24 Feb 2012 10:23

Ok Thanks......
Top
User avatar
janko.kaljevic
Posts: 3565
Joined: 16 Jun 2011 13:48

Re: Need USB Virtual Com Port C code for LM3S9B95

#4 Post by janko.kaljevic » 24 Feb 2012 14:45

Hello,

@munishK301

Maybe I have not understood you well.
mikromedia for Stellaris has USB HID, which can be connected to PC to establish communication.

If you want to connect it to via Serial port on mikromedia, you will need to do it with MAX3232 board or UAB UART board.

Best regards.
Top
munishK301
Posts: 30
Joined: 08 Feb 2012 07:04

Re: Need USB Virtual Com Port C code for LM3S9B95

#5 Post by munishK301 » 25 Feb 2012 04:34

Ok, Thanks Sir....
Top
Post Reply

Return to “mikroC PRO for ARM General”