Hello,
Since VTFT as merged into MikroC PRO for PIC32 4.0.0, I tried to add SSD1289 as copy of SSD1963 (16 bit) in Display_Controller.xml, but wizard doesn't show it !!!
I was able to add and was really well working with VTFT 4.6 as standalone. Tried with already existing custom board defs (that was working) and from scratch, but nothing work...
I have another problem with Project settings that is not saving my changes but perhaps it's linked to this.
Please help !!!
Thanks a lot.
Best regards.
MikroC PRO for PIC32 4.0.0 : cannot add custom controller
-
- Posts: 103
- Joined: 15 May 2012 12:30
- dusan.poluga
- mikroElektronika team
- Posts: 780
- Joined: 02 Feb 2017 14:21
Re: MikroC PRO for PIC32 4.0.0 : cannot add custom controlle
Hi,
Create a empty Visual TFT project from the standalone Visual TFT.
Open mikroC pro for PIC32 and click on Project>Import VTFT Project.
Browse to where you have saved your project. You need to look for a file with this extension .vtft for example:
yourStandaloneProject.vtft
Select it and click on the Open button.
Next click on import project. In a couple of seconds your project will be converted and imported.
If you had a custom Visual TFT scheme it will also be imported and saved for future use.
I hope this will be helpful.
Best Regards,
Create a empty Visual TFT project from the standalone Visual TFT.
Open mikroC pro for PIC32 and click on Project>Import VTFT Project.
Browse to where you have saved your project. You need to look for a file with this extension .vtft for example:
yourStandaloneProject.vtft
Select it and click on the Open button.
Next click on import project. In a couple of seconds your project will be converted and imported.
If you had a custom Visual TFT scheme it will also be imported and saved for future use.
I hope this will be helpful.
Best Regards,
Dusan Poluga.
-
- Posts: 103
- Joined: 15 May 2012 12:30
Re: MikroC PRO for PIC32 4.0.0 : cannot add custom controlle
Hello,
Hum that's OK for import, BUT the TFT controller is not recognized (SSD1289) and it'll not compile !
In VTFT project settings, the combobox for controller is empty and resolution is inverted (320x240 instead of 240x320).
Just to take into account edited Display_Controllers.xml, please !
Thanks !
Hum that's OK for import, BUT the TFT controller is not recognized (SSD1289) and it'll not compile !
In VTFT project settings, the combobox for controller is empty and resolution is inverted (320x240 instead of 240x320).
Just to take into account edited Display_Controllers.xml, please !
Thanks !
- dusan.poluga
- mikroElektronika team
- Posts: 780
- Joined: 02 Feb 2017 14:21
Re: MikroC PRO for PIC32 4.0.0 : cannot add custom controlle
Hi,
Can you send me your standalone visual tft project so i can try to import it and to try to reproduce the same behavior ?
This inversion of the resolution should not happen.
Best Regards,
Can you send me your standalone visual tft project so i can try to import it and to try to reproduce the same behavior ?
This inversion of the resolution should not happen.
Best Regards,
Dusan Poluga.
-
- Posts: 103
- Joined: 15 May 2012 12:30
Re: MikroC PRO for PIC32 4.0.0 : cannot add custom controlle
Hello,
It's not complicated to reproduce.
Create a project with standalone VTFT 4.6.1 using edited "Controllers.xml" file joined (in ZIP), with SSD1289 controller. It's possible.
With integrated VTFT, the SSD1289 controller disappear with edited "Display_Controllers.xml" file joined (in ZIP) when creating new pattern, even if it's inside !
That's all.
I join also the board def working with standalone version, not working with integrated (named "Domotique_Carte_Piece").
Thanks a lot !
Best regards.
It's not complicated to reproduce.
Create a project with standalone VTFT 4.6.1 using edited "Controllers.xml" file joined (in ZIP), with SSD1289 controller. It's possible.
With integrated VTFT, the SSD1289 controller disappear with edited "Display_Controllers.xml" file joined (in ZIP) when creating new pattern, even if it's inside !
That's all.
I join also the board def working with standalone version, not working with integrated (named "Domotique_Carte_Piece").
Thanks a lot !
Best regards.
- Attachments
-
- Domotique_Carte_Piece.zip
- (1.19 KiB) Downloaded 99 times
-
- Display_Controllers.zip
- (1.25 KiB) Downloaded 98 times
-
- Controllers.zip
- (2.94 KiB) Downloaded 101 times
Re: MikroC PRO for PIC32 4.0.0 : cannot add custom controller
Hi
I am having same problem, did you managed to integrate it?
I have a product with ILI9341 and by a mistake, seller sent me a lot of SSD1289 so I want to use them up. I am playing all day to integrate SSD1289 and I did manually, it does compile, but still I have a feeling that it doesnt work wit a VisualTFT (integrated part of mikroC PIC32)
Any ideas before starting to dig in with a logic analyzer?
Thanks!
I am having same problem, did you managed to integrate it?
I have a product with ILI9341 and by a mistake, seller sent me a lot of SSD1289 so I want to use them up. I am playing all day to integrate SSD1289 and I did manually, it does compile, but still I have a feeling that it doesnt work wit a VisualTFT (integrated part of mikroC PIC32)
Any ideas before starting to dig in with a logic analyzer?
Thanks!
Milan Pavlica YU7XW