Hi,
Please provide me a code for portrait display of TFT Proto 4.3" 480x272 ATO43B35 TFT screen with SSD1963 display controller.
I have been trying too hard but yet no luck.
I will be very grateful to you guys.
regards
Saurabh
TFT Proto 4.3"480x272 ATO43B35 TFT screen - PORTRAIT DISPLAY
- dusan.poluga
- mikroElektronika team
- Posts: 780
- Joined: 02 Feb 2017 14:21
Re: TFT Proto 4.3"480x272 ATO43B35 TFT screen - PORTRAIT DIS
Hi,
I have responded to you on the ticket.
Lets continue our conversation their.
Best Regards,
I have responded to you on the ticket.
Lets continue our conversation their.
Best Regards,
Dusan Poluga.
Re: TFT Proto 4.3"480x272 ATO43B35 TFT screen - PORTRAIT DIS
Hi Dusan,
Thank you very much for replying me.
Actually, i am stuck with the SSD1963 LCD controller. Basically, i have a landscape mode working code. But due to change in specification, i need to change the orientation to portrait mode. Now i am trying to use the function to change the orientation but the problem comes when i need to manually have to change all the widgets orientation. So here i need the commands in a precise way that changes my HOST-->FRAME buffer and from FRAME buffer---> LCD DISPLAY. Such as one command is (0x36) for orientation. Now it needs a certain specified parameter. Now i do not know how this parameter will work to change the landscape to portrait mode. Also making me understand the LCD work flow will be a great help. Also, i have doubt that the HSYNC and VSYNC values also need to be changed while changing orientation, so i need to know that too to what values i have to feed to the registers. Please help me!!
Thank you very much for replying me.
Actually, i am stuck with the SSD1963 LCD controller. Basically, i have a landscape mode working code. But due to change in specification, i need to change the orientation to portrait mode. Now i am trying to use the function to change the orientation but the problem comes when i need to manually have to change all the widgets orientation. So here i need the commands in a precise way that changes my HOST-->FRAME buffer and from FRAME buffer---> LCD DISPLAY. Such as one command is (0x36) for orientation. Now it needs a certain specified parameter. Now i do not know how this parameter will work to change the landscape to portrait mode. Also making me understand the LCD work flow will be a great help. Also, i have doubt that the HSYNC and VSYNC values also need to be changed while changing orientation, so i need to know that too to what values i have to feed to the registers. Please help me!!
- dusan.poluga
- mikroElektronika team
- Posts: 780
- Joined: 02 Feb 2017 14:21
Re: TFT Proto 4.3"480x272 ATO43B35 TFT screen - PORTRAIT DIS
Hi,
Please respond to me on the ticket regarding this issue.
Best Regards,
Please respond to me on the ticket regarding this issue.
Best Regards,
Dusan Poluga.