Hi everybody, i'm struggling a little bit with following problem of binary conversion 2 have to convert two numbers into an binary value to concatenate both 8 bit binaries to a 16 bit binary. like this: 219 = 11011011 and 7 = 00000111, now i must concatenate both to 0000011111011011 after doing that...

Hi filip,

thank you for your advice about the OSC FQ setup. Great!
2.nd question was only because of personal convenience, i'm used to have all HW setup at the start of the code. Would be nice to have only.

best regards + Thank you!
Ingolf

Hi, to have errorfree adjustment to my serial data speed constraint of 230400baud, i would use 18.4320 MHz and also 14.7456MHz. As far as i have evaluated, none of such clock speeds can be set up in "Project Settings" -> "MCU Clock". to continue work with mikroBasic, it would be essential to set bot...

Hi filip, my MCU is a ATMega2561 running at 18,432000 MHz. The baudrate of 230.4 kBaud works well with another basic program code. But with this basic i have a bottleneck in this application. Now i am rewriting the code with mikroBasic, that is a good learning by doing and i will see if mikrobasic p...

Hi, i´m usin mikroBasic 5.8.0 and would be pleased if some of you could help me about this usart data reading problem. I have tried several solutions but none was at least successsful, i am also beginner with mikroBasic for AVR. from a serial RS232 source comes 230400 baud raw data and i habe to loo...

Dear mikroE Team,

my AVR application runs with a XTAL of 14.745600 MHz. That is defined for UART speed constraints.
Unfortunately, this Frequency is not included in the selectable List "Device Frequencies".

It may be possible to add 14,745600 MHz and as well 3,6864 MHz ?

best regards
Ingolf

Hello dejan, the problem could be solved by redoing the complete installation ( i have done that twice before) but at the point driver installation, to select surprisingly the Win98 driver suite for my Windows2000 OS. With the system hardware manager i was able to locate the win98 driver in c:\progr...

Windows2000 5.00 2195 + SP4 Intel 4 CPU 2,8GHz 3.800.560kB RAM Hi, i attempt to install the appropriate driver of the AVR Prog. As recommended i have let run the USb18PRG-x86.exe, the mikroE AVR PROG Installation Assistant. The Installation status was reported as: mikroelektronika(USB18PRG)ClassName...

Hi mikroE AVR Team, since a long time working with Bascom, i am studying now mikroBasic AVR and i am rewriting a bascom project to mikro AVR code in the hope to have more performance on high speed data writing to CF-Card. I am a little bit wondering what kind of different the both basic instruction ...

Hello Dejan,

thank you for your fast response and your recommendation. Sorry i have overseen to look into
the example folder of my mikrobasic program suite. I added the code and the compiler error was gone.

best regards!
Ingolf

STM32F107VC EasyMXPro for STM32 ARM MikroBasic V2.5pro for ARM + mB dongle mB ARM Workhorse: IBM R40 / 2 GHz, 1.5GB RAM Hi everybody, what could be wrong with the blue line?? '------------------------------------------------------------------------------ 130 dim tmp1 as longword . ' a lot of variabl...

Hello mikroelektronika - mikrobasic team in general, special for the hardware, the explanations are very excellent and let you never in doubt. For the programming language description it is a little bit different. as a mikrobasic-beginner with a lot of experience in other basic languages, i would pr...

Hello Sergiu, i thank you a lot to share your exerience. I work with bascom also since many years and i have realized some different types of control and data recording units for our flight test measurement equipment. But ATmega is coming to an end of performance for future applications who need muc...

Hello, since a week i am proud to have a brandnew EasyMX Pro for STM32 ARM and let me say it is a amazing piece of hardware and also the given documentation is made very good! So fire is burning to start! I am very familiar with the Atmega controllers and BASCOM but i start now to learn microBasic b...