Thank ,

So how can i get the time from the 16bit register?

Best,
Sameer

I used timer calculator but the result is not correct it takes longer time than
What i need for the toggling an LED.

I'm using mikroprogrmmer for stm32. What is the correct scheme for editing the settings?
Because i think the problem is in configurations of the mcu.

Hello , I have a problem in timer , how can i calculate the time in seconds from the timer register? for example this is my program: if(first_rising_edge == 1) { start_timer_3; } if(second_rising_edge == 1) { stop_timer_3; time_elapsed = ? frequency = 1/ time_elapsed; } the idea is to start timer 3 ...

Hi strahinja.jacimovic,



I've connected two buttons and external interrupts are generated when the buttons are pressed and this worked and was able to control the volume thanks.

i got your message thank you, can you please see the message I've replied to.

kind regards,
Sameer Asiri

Ok thank you i will try the method you mentioned and tell you whether the problem is solved or not.

Best,
Sameer

Hi ,

I'm planning to use two buttons to control volume but it seems that when the file
Sound is running you can't control volume! I have to wait till the next file is running
Is there a solution to this problem ??

Hi MikroE. I used the example MP3 with Mikromedia for Stm32 M4 and was able to play sounds in from the SD card but the problem is if i want to increase the volume when the sound is playing ! i tried to use the function set volume but the volume did not go high and sound even became noisy ! So is the...

THANKS HELPED ME A LOT.

Never mind i solved the problem.

thanks.

hello everybody. i have a problem, when i write a function to read ADC value(AN8) on mini-32 pic32 the program stops working. But when i remove the function the program works fine i can use the touch panel. i'm rally trying to display the result of ADC on a label created by VGLCD with no success ! t...

the screen light is dim!

is there anyway to make it brighter?

i have sent the info

But i couldnt check my ticket when i sign it says invalid data !!!
Even though i entered a valid data !!
Can you please give me a link where i can type in my ticket number?

Ticket id : pxs-970-83902

hello everybody i hope you be fine. i got easy tft and Mini32 PIC32MX534F064H from MikroE. i have a problem the display doesn't work there is no light even though i connected pin 5v(easy tft) to 5v and vcc(easy tft) to 3.3v and gnd(easy tft) to gnd but the display is not working at all!!! I hope if ...

hello everybody i hope you be fine. i got easy tft and Mini32 PIC32MX534F064H from MikroE. i have a problem the display doesn't work there is no light even though i connected pin 5v(easy tft) to 5v and vcc(easy tft) to 3.3v and gnd(easy tft) to gnd but the display is not working at all!!! I hope if ...